CCTV Quad Screen
Processor: Suitable for all CCTV Video Surveillance Cameras in this catalogue.
Connect Eight Video Cameras (or other Video Sources) to Digital Quad Processor
which performs an Analog to Digital conversion on signals from each input then
digitally constructs two alternating Quad Screen images that are output as a
standard 75 ohm 1 v p-p Composite Video signal. Monitor Output for live viewing
may be alternating Quad Screen Images, Sequentially Switching Images or any
Manually Selected input channel. Alarm inputs, Recover input and Alarm output
may be used to control a VCR for 'Event-Only' recording and/or for multiple
Remote Monitoring Consoles that allow selection of any Channel or Alternating
Quad Screen Images during live viewing. Audible Video Loss and Alarm buzzers
alert user to intrusion and/or interference with Camera video or power supply
wiring. Log record of Alarm and Video Loss events. Alarm period is programmable
and may be used to control VCR recording period. RS232 interface for remote
control using a PC
Cat Code: QUAD-BW
501
8 CAMERA 2
PAGE QUAD* Time/Date/Title *
Alarm Event Log* Video Loss Detection * Alarm I/O * Security
Lock * RS-232 Remote Control
GoVideo
Plug Pack & WARRANTY EXTENSION to 2 YEARS + $30 2 YEAR WARRANTY when purchased & used with GoVideo
Plug Pack
Output to Monitor: Alternating Quad Screens, A or B Quad Screen, Full Screen or
Sequentially Switching.
8 CAMERA - 2
PAGE
DIGITAL DUO QUAD PROCESSOR NEAR SUPER-VHS IMAGE QUALITY
Time / Date / Title 25 fields per second input sampling rate, 50 fields per second output.
8 bit Analog to Digital Conversion, 256 level Grey Scale.
Video Loss Detection with Audible Alarm and Time/Date Log entry.
A/B or 1, 2, 3, 4, 5, 6, 7, 8 Automatic Switching Modes 1-99 second Dwell.
Log of Alarm and Video Loss Events.
Security Lock.
RS-232 Remote Control Interface.
On-Screen Set-Up Menu. Video Camera Inputs: 8 Standard CCIR
Composite Video with Gain Controls. VCR Video Output: Alternating Quad Screens
~ 2 second Dwell (* except when Screen A or Screen B is selected during live
monitoring). Video Monitor Output: Automatic Sequential
1, 2, 3, 4, 5, 6, 7, 8, Alternating A/B Screens, Manual Selection of any Camera,
Screen * A or Screen * B (* not recommended during recording).
8 Normally Open Alarm Inputs, 1 NO
Recover Input.
SPDTAlarm Output 1 - 999 second adjustable.
12 Volts DC, ~ 7 Watts, 2.1 mm × 5.5 mm socket.
Input / Output: RS-232 & Alarm via 25 pin D-Sub sockets, Video via BNC.
430 mm (W) 50 mm (H) 248 mm (D), 2.5 kg.
Use a low-cost domestic VCR and our 'VCR Controller' for 'Event-Only' recording,
12 ~ 15 Hours Real-Time click here
for details.
Made in:
Taiwan
Manufacturer's
Experience: 18 + YEARS in Electronics * 10 + YEARS with QUADS
Plug-In DIY AV 20 metre Cable / Adaptor Set: 20
metre AV Cable with moulded Plugs & Socket. Two RCA Plugs & DC Plug for Camera
end. Two RCA Plugs for input device, DC Socket for Plug-Pack. Two BNC-RCA
Adaptors for Camera, VCR, Quad, Switcher, Multiplexer, Monitor, Transmitter,
etc.
with 1.5m Cable &
Adaptors: + $8
Dual 1.5 m Cable with two RCA Plugs each end, supplied with two BNC-RCA Adaptors
for interconnecting: Quad / Multiplexer / Monitor / VCR etc.
2 YEAR WARRANTY when purchased & used with GoVideo
Plug Pack
Time-Lapse VCRs