Worldwide Air Delivery
|
|
O'Nite Delivery
|
|
|
Ready-to-Use 8 Watt LIGHT EMITTING DIODE PCB for Monochrome & InfraRed sensitive Day/Night colour Cameras. Light Emitting Diodes: 36 pieces, ~ 850 nm wavelength, ~ 70º radiation angle, produces a visible dull Red glow. Main Spot Diameter: ~ 2.5 metres @ 3.5 metres. Illuminates ~ 90% of the width-of-vision with 1/3" Image Sensor & 6 mm Lens. Range is dependent on: Lens Transmittance, Camera Sensitivity & Spectral Response of Image Sensor/Camera. Power Requirements: Up to 12 Volts DC, ~ 650 milliamps @ 12 Volts, 2.1 x 5.5 mm DC socket on ~ 300 mm cable. PCB ~ 75 x ~ 90 mm (can be 'cut' to 75 x 82), 50 mm 'Hole'. Best results will be achieved by matching the 'Lens' Horizontal Angle-of-View and the LED Radiation Angle (when Camera and Illuminator are positioned at the same distance from subject and illumination of full width is required). |
Ready
to use Hi-Power 140 LED Illuminator![]()
|
|
discontinued
|
Ready
to use LED Illuminator in Outdoor Camera Housing![]()
|
|
discontinued
|
INFRA
RED LONG PASS FILTER SHEETS Make a Higher Output INCANDESCENT Illuminator![]()
|
|
discontinued
|
Infrared Application Notes
INFRA RED LONG PASS FILTERS for Lenses
SEE-in-the DARK Camera with Inbuilt InfraRed LEDs Colour Day/Night IR Camera