Priced CCTV IP Network Surveillance &
Security Equipment Catalogue
Please ensure you have read & understood our
Terms & Conditions before you browse this Catalogue
|
|
|
 |
Easily/Quickly convert ordinary CCTV Cameras
or any Camera with Composite Video output to
an IP Network Camera with 2-Way Audio Alarm
I/O 'periodical Snapshot' SD
Recording & RS485 PTZF control
J
Optional 5 ~ 24 dB High Gain Long-Range 2.4
GHz Antennas
J
RS485 output for Pan Tilt Zoom control
PELCO™-D
protocol compatible software
J
Two Alarm Inputs Two SPDT Relay Alarm
Outputs
J
Two-Way Audio ideal for entry communication
and access control (using Alarm Output)
J
Periodical Snapshot Recording to SD
Card
J
SMA female
RF Antenna output for easy connection of
Coax Cables & High 5 ~ 24 dBi Gain Antennas
for increased range
J
free
36 Channel
Remote Monitoring - Recording Software is
compatible with following members of this
product family:
IP-DdnExAV
*
IPw-TX *
IP-DdnAV *
IP-CSdnAV *
IPw-CSdnAV *
IP-CSHR *
IP-CSdn
*
IP-CSdnHR *
IP-CSdnProg
J
free:
SDK & API for System
Integrators & Software Developers
|
|
Network wired or
wireless 720 H-Pixel Video Server / Video Recorder
with 2-Way Audio.
Easily relocatable Network Surveillance
System just connect to Power.
WEP 64 / 128-bit, WPA, PSK IEEE 802.11b/g .
RS485 output for external devices PTZF, etc,
PELCO™-D compatible.
Multi Camera Surveillance using free
36-channel software.
Real-Time 25/30 IPS Live Monitoring.
IE Browser Remote View 10 Simultaneous
users.
Two-Way Audio for direct communication / intercom.
Web Cam using Internet Explorer Browser.
Remote Monitoring / Playback / Search / Backup.
Dual streaming MPEG-4 / JPEG codec with adjustable
quality/compression to cater for fast/slow &
narrow/wide Bandwidth Networks.
Video Motion Detection 3 Zones & 10 Sensitivity
Levels.
Free 36 Channel remote monitoring and recording
software.
HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP, DDNS,
NTP, 3GPP, UPnP.
FTP - e-mail - Dynamic Domain Name Server (DDNS)
capabilities.
SD Flash Memory Card Slot for 'periodical
Snapshot' stand-alone or backup Recording,
Triggers: IP Check, Network disconnected, Motion
detected & Alarm input.
Order
Code: [IPw-TX]
$339
$259 < 5 + >
ISO9001
Taiwan Quality
Compare this
with other devices in this IP CCTV Network Family
OPTIONS
[SD-2GB] 2 GigaByte SD Memory Card
$25
[Mike]
Microphone & Preamplifier
$20
[REG12/1A]
Plug Pack Regulated 12 VDC 1 Amp
$20
[REG12-Auto
for 12 V Battery/Vehicle operation
$29
[Rect-Reg+]
Rectifier Regulator for long cable run, 24 vac
power, etc
[Cable-LANxo] Short
Crossover LAN Cable $5
(simplify setup)
Use existing
Composite Video Coaxial Cable for Network low cost
easy speedy analog-cctv to Network-CCTV conversion
more...
Combine this with a
Maxi Camera
and build a Customised Network
Camera.
RS485 Analyser displays
hexadecimal data from any RS485 controller
|
|
JPEG Image from SD Card
JPEG Image Recorded to PC
* click on image to view full size *
Image Source
Digital TV.
to view pages from IPw-TX Wired/Wireless Network AV
Server 'User's Manual'
to view pages from free
36 Channel Network Camera Monitoring Recording
Software 'User's Manual'
|
|
|
Network Protocol: HTTP, TCP/ IP, UDP, SMTP, FTP,
PPPoE, DHCP, DDNS, NTP, 3GPP, UPnP.
Remote Software: Free
36 Channel remote monitoring and recording software.
A/D Resolution: PAL 720 x 576 (D1)
352 x 288 (CIF) 176 x 144 (QCIF).
Triggered Actions: Mail, FTP, Alarm
Output (1 or 2), Save to SD card.
Backup SD Card 128 MB to 4 GB SanDisk
or Transcend Card.
Ethernet LAN / WAN Port 10/100 Base-T
, RJ45 connector.
Firmware Upgrade: http mode, can be
upgraded remotely.
Web Browser Microsoft Internet
Explorer 6.0 or above.
Image Display Rate Full D1 Resolution
PAL: 25 FPS.
Compression Format Dual Mode: MPEG4 /
MJPEG.
Security: Password Protection
configurable.
Video Bitrate Adjustment: CBR, VBR.
Video Motion Detection (3 Areas).
Pre / Post Alarm: Configurable.
Users: Up to 10 simultaneous.
SDK: available for integration.
Video Format: AVI.
Full Screen Monitoring.
Video Playback.
Image Snapshot.
Audio 2 Way.
When used with
DomePTZ-dn1 |
DomePTZ-dn2 |
DomePTZ-dn3 |
100 Channel RS485 PELCO™-D
compatible Remote Pan / Tilt / Zoom / Focus /
Auxiliary Receiver |
AutoCam-dn Security Camera select
EP Pelco-D 2400 bps.
Made in Taiwan in an
ISO 9001 certified factory.
Manufacturer's
Experience: 18 + Years.
Wireless
WEP 64 / 128-bit, WPA,
PSK IEEE 802.11b/g .
TX Output Power
typically: with Ant-W5dB Antenna, CCK 14 ~ 16
dBm (~ 30 mW), OFDM 10 ~ 13 dBm (10 ~ 20 mW).
RX Sensitivity
typically: with Ant-W5dB Antenna, 11 Mbps <-84
dBm, 54 Mbps <-70 dBm.
SD card management
Recording Trigger: Motion Detection
(3 separate areas), IP check, Network disconnected &
Alarm Input.
Video Playback: Yes.
Compatibility: 128 MB to 4 GB SanDisk
or Transcend.
INPUT / OUTPUT
Video Input/Output:
1.14 V p-p Composite Video 75 ohms, suit Australian
TV, VCR, AV & Video inputs, BNC socket.
Audio Input/Output:
Line Level input for
Microphone & Preamplifier, output for Amplified
Speaker, RCA socket.
Alarm: 2 x Inputs, 2
x SPDT Outputs, Press-to-Release terminals.
NETWORK: Standard
RJ45 8p8c socket.
RS485:
Press-to-Release terminals.
RS232: DB9 socket.
Radio Frequency:
Standard SMA socket, external thread, socket
contact.
Power: 12 Volts DC
Regulated, ~ 350 mA, 2.1 x 5.5 mm DC socket, center
pin = (+).
Dimensions: ~
134 x 42 x 107 mm, ~ 440 grams.
Depends on
Surroundings, Obstructions, other Transmitters (2.4
GHz Cordless Phones, Wireless LAN, etc), Antenna
Alignment, Electromagnetic & Radio Frequency
interference in the vicinity. This device may be
affected by and may affect other devices that
operate on or near the same frequency causing minor
to severe interference.
In ideal, clear,
Line-of-Sight conditions with Ant-W5dB Antenna and
communicating with a device of same or higher Output
& Sensitivity
up to ~ 100 metres.
Correctly matched and
aligned 24 dBi antenna on one device up to ~ 1000
metres.
Correctly matched and
aligned 24 dBi antenna on both devices up to ~ 2000
metres.
Due to the nature of
Radio Signals results are unpredictable (in the same
manner as Mobile / Cellular Telephones) signals
reflected from surrounding objects arriving at
Receiver antenna may Add-to or Subtract-from the
direct signal from Transmitter. Directional antennas
may reduce affect of reflected signals.
|
Range and Signal to
Noise Ratio (SNR) may be improved by increasing gain
of antenna on either/or both devices. For maximum
signal transfer both antennas should be the same
polarity, that is both oriented Vertically or
Horizontally.
 |
Cat Code:
Ant-Stub
$15
2.4 ~ 2.5 GHz
Whip Antenna, 0 ~ 3 dBi gain, ~ 50 ohms
impedance. Antenna for Wireless LAN, WiFi
Network, Wireless ADSL, Video Transmitters,
etc.
Length: ~ 52
mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male
Connector. |
 |
Cat Code:
Ant-Whip
$20
Vertical Whip
Antenna Omni Directional 2.4 ~ 2.5 GHz, ~ 3
dBi gain, ~ 50 ohms impedance. Antenna for
Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc.
Length: ~
107 mm straight, ~ 87 mm folded. Diameter: ~ 9
mm. Weight: ~ 11 grams.
SMA
male Connector. |
 |
Cat Code:
Ant-W5dB
$20
Vertical
Whip Antenna non-directional 2.4 ~ 2.5 GHz,
~ 5 dBi gain,
~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @
Base ~ 6 mm @ Top. Weight: ~ 30 grams.
SMA male Connector. |
 |
Cat Code:
Ant-W12dB
$129
High Gain
Vertical Whip Antenna 2.4 ~ 2.5 GHz, ~ 12 dBi
gain, ~ 50 ohms impedance. Antenna for
Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc.
Length: ~
1210 mm, ~ 1425 mm with Base Mount Tube.
Diameter: ~ 42 mm @ Base ~ 22 mm main center
section ~ 24 mm top cap. Weight: ~ 670 grams ~
930 grams with Mounting Tube & Clamp/Bracket.
Supplied
with Base Mount Tube and Clamps/Brackets for
surface or Tubular Mast mounting.
N
female Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-W15dB
$169
High Gain
Vertical Whip Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi
gain, ~ 50 ohm impedance. Beamwidth:
Horizontal 360º, Vertical 11º. VSWR (Voltage
Standing Wave Ratio) ~ 1.5. Maximum Power 50
Watts. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Length: ~ 1640
mm, ~ 1935 mm with Base Mount Tube. Diameter:
~ 42 mm @ Base ~ 20 mm main center section ~
22 mm top cap. Weight: ~ 680 grams ~ 950 grams
with Mounting Tube & Clamp/Bracket.
data sheet
N female
Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Cat Code:
Ant-Y15
$99
Yagi
Antenna for
Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 15
dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58
Coax cable. Dimensions (excluding Clamps) ~
650 x 95 x 35 mm, ~ 680 grams.
Supplied with ~
140 x 70 mm Aluminium mounting plate, Clamps,
etc. Pictured in Vertical Polarity orientation
* Mast not included.
SMA male
Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-Y17.5C
$129
Yagi Antenna
2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms
impedance. Beamwidth: E23, H24. Antenna for
Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter,
~ 800 grams, ~ 500 mm RG-58 Coax cable.
Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA male
Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-F16
$79
Antenna for
Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc. COMPACT Flat 2.3 ~
2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~
27º (H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast
Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455
(H) ~ 30 mm (D), ~ 740 grams.
Suitable for
Indoor and sheltered Outdoor use under eaves,
etc
Pictured in
Vertical Polarity orientation
N
female Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-F18
$149
COMPACT Flat
2.3 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 45º (H) ~ 75º (V).
Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied
with versatile selection of mounting hardware
for Wall/Ceiling mounting & two Tubular Mast
Clamps.
Dimensions
(excludes Socket & Brackets) ~ 262 (W) ~ 262
(H) ~ 38 mm (D), ~ 950 grams.
Suitable for
Indoor and sheltered Outdoor use under eaves,
etc
Pictured in
Vertical Polarity orientation.
N
female Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-F20
$179
Compact Flat
2.4 ~ 2.5 GHz, ~ 20 dBi gain, ~ 50 ohm
impedance. Beamwidth: E30º H90º. Front:Back >
25dB. VSWR ~ 1.6. Maximum Power 200 Watts.
Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with
50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~
330 (H) ~ 40 mm (D). Weight ~ 1.65 kg
including mounting bracket. Tilt +/- ~ 20º.
Suitable for
Indoor and sheltered Outdoor use under eaves,
etc
Pictured in
Vertical Polarity orientation.
data sheet
N
female Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-P10
$79
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain,
~ 50 ohm impedance. Beamwidth: ~ 30º (H) ~ 60º
(V). Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with
Tubular Mast Clamp. Dimensions (excludes
Socket & Brackets) ~ 275 (W) ~ 90 (H) x ~ 58
mm (D), ~ 235 grams.
Suitable for
Indoor and sheltered Outdoor use under eaves,
etc
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors
& Extension Cables> |
 |
Cat Code:
Ant-P24
$199
Grid-Parabolic
Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~
2.5 GHz, ~ 24 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 11º (H) ~ 7º (V). Front:Back ~
25dB. VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with
Clamps to suit 40 ~ 50 mm Tubular Mast,
bracket for Vertical or Horizontal mounting
60º Tilt in 10º increments. Aluminium Grid (2
sections) ~ 1060 (W) ~ 600 (H) mm assembled.
Weight ~ 2.8 kg including mounting bracket.
Pictured in
Horizontal Polarity orientation.
data sheet
N female
Connector. <Adaptors
& Extension Cables> |
|
Parabolic Yagi & Flat
are directional antennas. Whip antennas when
used vertically are for most practical purposes
omni or non directional.
To maximise 'Range'
minimise the length of Coax Cable between Antenna
and device.
|
  |
Cat Code: SMA-REVm
$10
Conventional SMA (external
thread, socket contact) to Reverse Polarity
SMA connector (internal thread, socket contact,
Hex Nut)
Center Socket
Contact on both ends (no Pins), converts
Reverse Polarity SMA to conventional SMA (use with
Netcomm NB9W, etc) |
 |
Cat Code: SMA-REVf
$10
Conventional SMA
connector (internal thread, pin contact, Hex
Nut) to Reverse Polarity SMA connector (external
thread, pin contact)
Central Pin
Contact on both ends. |
  |
Cat Code:
SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut)
to N female. Suitable for P18G & P24G
discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male.
Suitable for W12dB, W15dB, F16, F18, F20 & P24
antennas. |
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male.
Suitable for P10 antenna. |
 |
Cat
Code: Cable-178/30
$19
30
cm RG-178 Coax cable with SMA male & female
connectors. |
 |
Cat
Code: Cable-58/450
$39
~ 450 cm Coax Cable with SMA male & female
connectors. Attenuation 0.6 ~ 0.9 dB/metre @
2 GHz., 0.8 ~ 1.4 dB/metre @ 5.8
GHz
Cat
Code: Cable-23/450N
$39
not pictured
~ 450 cm Coax Cable with SMA & N
male connectors. Attenuation ~ 0.75
dB/metre @ 2.4 GHz, ~ 0.8~1.4
dB/metre @ 5.8 GHz. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas. |
Antenna Gain... what does it mean ??? a
simplified explanation
Received signal strength from an antenna with 3 dBi
gain will be double that from an antenna that has 0
dBi gain, received signal strength from a 6 dBi will
be double that from a 3 dBi and so on... An increase
in antenna gain of 3 dBi is approximately equal to
doubling the transmitter output, received signal
strength or range can be increased by raising
antenna gain or transmitter output. Range can be
doubled by either increasing antenna gain by 6 dBi
or quadrupling the transmitter output.
Increasing the gain of the receiver antenna is an
alternative to increasing transmitter output.
In very simple terms: increasing
antenna gain from 0 dBi to 3 dBi is equivalent to
raising the output power of a 10 mW transmitter to ~
20 mW, (5 dBi to ~ 33 mW) (12 dBi to ~ 160 mW) (15
dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
|
|
|
|
|
|
|
All
information,
sitemap, specifications and
suggestions relating to CCTV, Security Equipment, Security Camera,
Video Surveillance Cameras, Tiny Pinhole Hidden Spy Covert Security
Video Cameras Closed Circuit Television Cameras, Lenses, Multiplexers,
Quads, Switchers, Monitors, Infrared Illuminators, Digital PC Video
Recording, Image Capture, Inspection, Filters, LEDs, etc in this
catalogue were prepared with the utmost care and every effort has been
taken to ensure accuracy, however we accept no responsibility for
errors or omissions. All material is copyright, copying, reproduction
or distribution is prohibited without our written authority. All
prices, product specifications, offers, terms & conditions are subject
to change without notice. |
|
